SWITCH CONFIGURATION
Farem this configuration to the switch
After obtaining the IP, we must find an IP dins of the IP range, for example, if the switch is 10.90.90.90 we will set the IP 10.90.90.91 with the netmask 255.255.255.0
It will be configured so that the VID matches both the VLANS created on the router’s memory card, for example if the users are logged into enp1s0.10 the VID of the VLAN will be 10, and then progressively, as the router has to donate internet to all the vlans, in the “Tagged VLAN” part we will find the port on which you will have to connect the cable.
When the switch is turned off it erases the configuration farem these steps
