FAQ ANGLÉS

Do you need help?

FAQs

Frequently Asked Questions.

First, we will access the file using this command: sudo nano /etc/network/interfacesFirst, we will access the file using this command: sudo nano /etc/network/interfaces

Then, depending on the network card you have, the following configuration will be applied:

  auto eth0
  iface eth0 inet static
  address NEW_IP
  netmask NETWORK_MASK
  gateway GATEWAY

How to do it

Depending on the distribution, you can use tools like apt (Debian/Ubuntu), dnf (Fedora), or pacman (Arch Linux) to install, update, or remove packages.

You can use the ftp command, e.g., ftp server_name

Once connected, you can use commands like:

  • ls to list files.

  • get FILE_NAME to download a file.

  • put FILE_NAME to upload a file.

How to do it

DHCP (Dynamic Host Configuration Protocol) automatically assigns IP addresses, network masks, and gateways to devices on the network.

Normally, the IP can be obtained by searching for the device on Google. After obtaining the IP, if for example it is 10.90.90.90, we change our computer’s IP to be within its range, e.g., 10.90.90.91.

Check the network configuration with commands like `ip addr` or `ping`. You can also review network configuration files and system logs (`journalctl`).

You can use the command `cat /etc/resolv.conf` to see the configured DNS servers.

Edit the configuration file /etc/vsftpd.conf and ensure that the following lines are enabled:

local_enable=YES
write_enable=YES

Esta web utiliza cookies propias y de terceros para su correcto funcionamiento y para fines analíticos y para mostrarte publicidad relacionada con sus preferencias en base a un perfil elaborado a partir de tus hábitos de navegación. Contiene enlaces a sitios web de terceros con políticas de privacidad ajenas que podrás aceptar o no cuando accedas a ellos. Al hacer clic en el botón Aceptar, acepta el uso de estas tecnologías y el procesamiento de tus datos para estos propósitos.
Privacidad